Seed Hawk 30 SERIES 2015 - Manual (Page 42)

SEED HAWK ® 2015 30 SERIES OPERATOR’S MANUAL – DOMESTIC 37
5.3.1 System Status Menu
5.3.2 Contrast Menu
5.3.3 Version Menu
To access from the Main
Menu Run Screen, press any
Soft Key to bring up the
Soft Key Menu, select
“Setup”, then “Version”.
This Soft Key Menu displays the current status state of your system. This menu
is beneficial when checking communications and/or connections. This menu is
“view only”.
This Soft Key Menu is quick access to view and/or change your current contrast
setting.
This Soft Key Menu displays the
current firmware version as well as
the date and times it was released for
production.
To access from the Main
Menu Run Screen, press any
Soft Key to bring up the
Soft Key Menu, select “Set-
up”, then “Status”.
To access from the Main
Menu Run Screen, press any
Soft Key to bring up the
Soft Key Menu, select “Set-
up”, then “Contrast”.
Pressing the Soft Key labeled "OK",
the Enter Key or the Selector
Knob will allow the user to exit the
menu.
Using the Selector Knob or the
Navigation Keys allows the user to
view sensors that do not fit on the
main screen.
To edit the contrast use the Selec-
tor Knob or any of the Navigation
Keys to increase or decrease the
contrast.
Press the Enter Key or the
Selector Knob to accept the change
and exit.