Seed Hawk 30 SERIES 2014 - Manual (Page 56)

SEED HAWK ® 2014 30 SERIES OPERATOR’S MANUAL – DOMESTIC 50
5.5.5 Seeder Stationary Mode
NOTE: This selection must
be disabled before actual
seeding is started.
This selection allows the operator to enter a fake ground speed so the entire
system can be run for a system checkout before entering the field. The entire
system must be functional to use this selection.
1. Using the Arrow Keys or Selec-
tor Knob, highlight and select “Seed-
er Stationary Mode.”
4. Select “Enable” and enter a fake
ground speed
2. Dialogue box will appear displaying
status. Using the
Selector Knob
highlight “Disabled” and press to open
3.Using the Arrow Keys or Selec-
tor Knob, highlight and select “En-
able.” Confirm selection by pressing
the
Selector Knob or Enter.
4. Increment: This value is the increment value for on the go rate adjustments
when seeding. The default value is 5.00 lb/ac.
5. OK/Cancel: Select “OK” to save any changes made. Select “Cancel” to
ignore any changes made.