Seed Hawk TOOLBAR 2013 45 & XL SERIES - Manual (Page 38)

SEED HAWK® TOOLBAR OPERATOR’S MANUAL 38
4.11.8 FURROW DEPTH AND WIDTH
The knives are designed to place fertilizer 0.75 in (19 mm) below and 1.5 in (38 mm) to the side
of the seed.
To adjust the depth of the fertilizer knife in relation to the seed knife:
1. Loosen hardware, #1 FIGURE 18.
2. Raise or lower fertilizer knife accordingly.
NOTE: Factory setting for fertilizer knife is “Y”: 20.875 in (530 mm) from the carbide tip
to the corner on the trip plate as shown in FIGURE 18.
3. Tighten hardware.
FIGURE 18
Y
1