Seed Hawk Raven 2012 - Manual (Page 198)

Chapter 10
186 Seed Hawk® Viper Pro™ Installation & Operation Manual
2. Press the INC or DEC keys to set the appropriate value for the selected digit and press the Enter key to set
the value.
3. Repeat the above procedure to set the remaining cal weight digits up to two decimal places.
4. To program the cal weight value, press the Right key to move the cursor past the last decimal place in the
cal weight value and press the Send key.
The remote tank console will send the entered cal weight value to the appropriate control node and will
return to the bin calibration screen.
5. Press the Exit key to return to the bin selection screen.
Send Key