Seed Hawk AIRCART 2012 - Manual (Page 29)

Seed Hawk
®
Manual Aircart Page 24
4.3.2 Operating the Conveyor
1. Ensure that all screens and
shrouds are in place and that
cleanout gate on each meter is
closed, Figure 17.
2. Activate tractor hydraulic circuit
#4, and pull the diverter valve up
to the auger circuit.
3. Use either of the buttons located
at the top and bottom of the
conveyor to start and stop the
conveyor,
Figure 18.
4. Whether filling or unloading the
aircart, the auger performs at its
highest capacity when product is
falling directly into the flighting.
4.3.3 Conveyor Position for Unloading Aircart
1. Using your remote, rotate the
conveyor hopper under any of the
aircart compartments in order to
empty them, Figure
19.
2. Loosen the cross thumb-nuts on
the cleanout gate, Figure 8, and
slide it up to allow product to fall
between the airstream tubes.
3. Once emptied, the bottom
airstream door can be removed
for complete cleanout below the
meter.
Figure 17
Figure 18
Figure 19