Seed Hawk Raven 2011 - Manual (Page 86)

Chapter 4
76 Seed Hawk™ Viper Pro™ Installation & Operation Manual
Tabs
The tabs along the right side of the maps area allow the operator to control the information displayed on-screen
during product application or within a field. Tabbed viewing allows the operator to quickly view coverage or
scouting maps while navigating through the field and avoid screen clutter.
The following sections offer a description for each of the available tabs.
Note:
When a job is not currently in progress on the Viper Pro console, the main tab will display all
accessible information. The other tabs will be available only when a job is in progress.
Some tabs may not be available unless the optional feature or hardware has been purchased and
installed.
Main Tab
The Main tab displays the following information:
• If a street map for the vehicles current location has been loaded on the Viper Pro console, the Main tab
displays the GPS position of the vehicle relative to the displayed map.
• The location of previously saved or created field boundaries is displayed on the Main screen. If a street map
is loaded on the Viper Pro console, field boundaries will be shown in relation to the streets.
• The vehicle’s current GPS position is displayed as a course direction indicator.
• The scale of the on-screen view is displayed in the lower right corner of the Maps area.