AEG MC1761E EN - Manual (Page 8)

6
Before operation
Setting the clock
Plug in the oven.
1. The oven display will flash:
2. Touch the STOP button the display will show:
To set the clock, see below.
Using the Stop button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
x1
Example: To set the 24 hour clock to 23:35.
Choose the 24 hour
clock. 1. Choose the clock
function. (12 hour
clock)
2. Set the hours.
Rotate the TIMER/WEIGHT
knob until the correct hour is
displayed (23).
Check the display.
4. Set the minutes. Rotate the
TIMER/WEIGHT knob until the
correct minute is displayed (35).
5. Press the MICROWAVE POWER
LEVEL button to start the clock.
NOTE:
1. You can rotate the TIMER/WEIGHT knob clockwise
or counter-clockwise.
2. Press the STOP button if you make a mistake during
programming.
3. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
show after the power is reinstated. If this
occurs during cooking, the programme will be
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, hold the MICROWAVE POWER LEVEL button down for 3
seconds. will appear in the display.
2. To set the 24 hour clock, press the MICROWAVE POWER LEVEL button once more
after Step 1, in the example below will appear in the display.
x1 and hold for
3 secs.
To set the clock, follow the example below.
3. Press the MICROWAVE
POWER LEVEL button
to change from hours
to minutes.
x1and hold for 3
secs. x1 x1
x1
1. AG-21+22D-EU English 20/05/2004 14:15 Page 6