Installation of an add-on card, Nightfall u3 – SHARKOON Skiller User Manual
Page 14
Advertising
NIGHTFALL U3
14
5. Connect the 3.5" device to the power supply and the mainboard.
6. Screw the 5.25" bezel with 3.5" opening into the front panel (fig. 20) and place it back onto
the case.
(5.25" bezel with 3.5" opening)
fig. 20
9. Installation of an add-on card
1. Remove the slot bezel’s fixation screw and take away the slot bezel (fig. 21).
fig. 21
Advertising
This manual is related to the following products: