Aspire Digital 7730G - Manual (Page 112)

102 Chapter 3
Replacing the Bluetooth Board
Replacing the ExpressCard Module
1. Replace the ExpressCard module on the upper cover.
2. Replace the two securing screws.
IMPORTANT:The correct location of the ExpressCard Module screws is illustrated in the following image. Do
not insert the screws in the remaining screw sockets. They are locations for upper cover screws.
1. Connect one end of the Bluetooth cable to the
mainboard as shown.
2. Connect the other end of the Bluetooth cable to the
Bluetooth Module as shown.
3. Locate the Bluetooth Module and replace the single securing screw.