SHARKOON Furious - Manual (Page 8)

FURIOUS
25
4. Press the I/O shield (delivered with the mainboard) into the I/O shield opening in the
case’s back side (fig. 5).
fig. 5
5. Place the mainboard back onto the stand-offs and screw the mainboard to them
(fig. 6).
(Screws for mainboard mounting)
fig. 6
6. Plug the connectors of the case’s front bezel to the respective connectors of the main-
board (fig. 7 / also refer to your mainboard’s manual for further information).
fig. 7
Note:
The eSATA cable connected to the front
eSATA connection should not exceed 50 cm
of length otherwise transmission errors may
occur! With premium quality eSATA cables
this maximum length may be exceeded.
Please note that this front eSATA connector
is a dual port (eSATA and USB).
ENGLISH