SHARKOON Rebel12 Economy - Manual (Page 9)

REBEL12 REBEL12
22
8. Installation of additional fans / optimized airflow
1. Put the fan from the inside against the respective bracket of the case (e.g. on the
case’s back side).
A
A
B
A – Back side of case (for example)
B – Fan
2. Screw the fan to the bracket from the outside.
A – Fan bracket
Note:
The Rebel12 case offers a lot of possibilities to install fans.
While installing fans make sure that (cool) air is taken in on the case’s front side
and blown out on its back side. The PC components with the highest heat develop-
ment should be placed directly within the airflow (see drawing).