Installation of a hdd, Rebel9 alu u3 – SHARKOON Rebel9 Aluminum U3 User Manual
Page 10
Advertising
10
REBEL9 ALU U3
6. Installation of a HDD
1. Remove the case’s right side panel.
2. Attach the decoupled mounting angles to the HDD from both sides (fig. 7).
(Screws for HDD mounting)
(Decoupled mounting angles)
fig. 7
3. Slide the HDD with attached mounting angles into the case’s respective drive bay and
screw it from both sides (fig. 8).
fig. 8
4. Connect the HDD to the power supply and the mainboard.
Advertising