ShelterLogic 70435 10 x 10 x 8 Shed-in-a-Box RoundTop - Manual (Page 5)

05_70435_0A Page 5
Cross Rails
A. Assemble 2 Cover Rails using parts as shown.
B. Assemble 3 Cross Rails using parts as shown.
C. Connect the Cross Rails to the End Rib at the ShelterLocks.
D. Place a Cover Rail at each leg and secure it with a Cover Clamp as shown. Slide the Cover Rails so they
are 8 inches up from the ground. Only HAND-TIGHTEN these bolts!
ShelterLock ® connections use #03032 (1 7
/
8
") Bolts. Cover Rail Clamp connections use #10115 (1 5
/
8
") Bolts.
3. ATTAcH cRoSS RAIlS AnD coVeR RAIlS To FRonT enD RIB
4. connecT MIDDle RIB To FRonT enD RIB
800939
800939
800939
800939
13201
13201
Assemble Cover Rails
ShelterLock ® connections use #03032 (1 7
/
8
") Bolts. Cover Rail Clamp connections use #10115 (1 5
/
8
") Bolts.
Cross Rails face toward the inside of the shed.
Cover Rails
noTe: The bolt heads at
the end ribs must be facing
outward to avoid damaging
your cover.
ShelterLock ® End Rib Connection
13345 800163
No Bolt at this connection
A
Assemble Cross Rails
800599 800599
10115
01010
B
c
800939
03032
01010
Cross Rail
D
10115
Cover
Rail
13202 End Rib
01011
01010
End Rib Cover Rail Clamps
10115
Cover Rail
13201
Middle
Rib
01010
01011
Middle Rib Cover Rail Clamps
noTe: All detail views
are from the inside.