ShelterLogic 62684 10 x 20 x 8 AutoShelter RoundTop 1020 - Sandstone - Manual (Page 5)

05_62684_0B Page 5
Cross Rails
A. Assemble 2 Cover Rails using parts as shown.
B. Assemble 3 Cross Rails using parts as shown.
C. Connect the Cross Rails to the End Rib at the ShelterLocks.
D. Place a Cover Rail at each leg and secure it with a Cover Clamp as shown. Slide the Cover Rails so they
are 8 inches up from the ground. Only HAND-TIGHTEN these bolts!
ShelterLock II ® connections use #03032 (1 7
/
8
") Bolts. Cover Rail Clamp connections use #10115 (1 5
/
8
") Bolts.
3. ATTAcH cRoSS RAilS AnD coVeR RAilS To FRonT enD RiB
4. connecT FiRST MiDDle RiB To FRonT enD RiB
800939
800939
800939
800939
13201
13201
Assemble Cover Rails
10115
Cover Rail
13201 Middle
Rib
01010
01011
ShelterLock II ® connections use #03032 (1 7
/
8
") Bolts. Cover Rail Clamp connections use #10115 (1 5
/
8
") Bolts.
Cross Rails face toward the inside of the AutoShelter.
Cover Rails
noTe: The bolt heads at
the end ribs must be facing
outward to avoid damaging
your cover.
ShelterLock II ® End Rib Connection
13345 800163
No Bolt at this connection
A
Assemble Cross Rails
800599 800599
10115
01010
B
c
800939
03032
01010
Cross Rail
D
10115
Cover
Rail
13202 End Rib
01011
01010
End Rib Cover Rail Clamps
Middle Rib Cover Rail Clamps