Lay out roof frame: 2. attach legs to frame, Assembly of frame – ShelterLogic 25783 12 x 12 Celebration Canopy User Manual
Page 4
05-25783-0D
Page 4
1. laY oUt rooF FraMe:
2. attaCH leGs to FraMe:
10394
10395
10394
10396
10395
10391
10585
10385
10392
10394
10396
10395
10585
10385
10394
10395
10391
10392
A. Assembly is easiest if you layout all
pipe parts as shown in the area you
intend to erect the shelter.
B. Attach rafter tube (10395) to (10394).
The connector tube should be facing out.
There are 4 sets.
C. Depress the buttons at the end of
each tube and attach into top connector
(10585). Ensure buttons click into place.
See Detail E.
D. Assemble rafter tube (10386) to
(10396), and (10395). Buttons should be
facing out.
E. Attach all four corner connectors
(10385). See Detail A.
A. Assemble leg tubes (10391) to (10392). See Detail B.
Do this with all four legs. Ensure all buttons pop into place.
B. Lift one side of the roof assembly and attach the 3-way
corner connector (10385). Put both legs in one side then
assemble other side. Ensure all buttons pop into place.
asseMblY oF FraMe
DETAIL A
DETAIL B