SnowEx HRK-020 - Manual (Page 6)

© Trynex International 2010 7 — 6
HRK-020 Installation Instructions
Step 1: Remove sprayer cover
Step 2: Install hose reel with 3/8-16 supplied hardware.
Step 3: Install spray wand holder to side of frame with 5/16-18 supplied hardware.
Step 4: Remove (3) 5/16 bolts from hose reel guide bracket and install pump bracket to hose reel.
Step 5:
Step 6: Install pump to braket.
Step 7:
Model# VSS-2000 and VSS-3000
Step 8: Install hose from regulator to manifold.
Step 9: Install hose from tee to hose reel.
Step 10: Tighten all hose clamps.
Step 11: Install main cover.
Step 12: Feed hose through hole in cover.
Step 13: Install quick disconnects on spray wand.
Step 14: Plug pump in and test.
Step 15: