Spectra Precision ADLCONF User Guide - Manual (Page 28)

28 ADLCONF User Guide
To clear a receive-only channel, select it and then click Clear .
To clear all receive-only channels, click Clear All .
To move a channel up or down in the channel table, click on the channel you want to
move and then either click the up or down arrow next the channel table, or “drag and
drop” the channel into its new position.
This configures the channel table that is displayed in the ADLCONF software. To
program the attached radio to receive on this frequency, you must click
Program (see
below). In addition, select File / Export to save any new radio configurations to your
computer.
Importing a channel table
To display a channel table created by the ADLCONF software, click Import and then
select the required .frq file.
Note – Only a dealer can program a radio with a channel table containing transmit
frequencies unless the channel table was tagged with the serial number of the radio. Please
check with your dealer for an Rx/Tx channel table created for your radio’s serial number.
Pacific Crest radio modems use an 18 MHz digitally compensated crystal reference
oscillator. The modems are designed to emit a minimum of energy at harmonic
frequencies, hence minimizing the effect of harmonic interference to other radio users.
However, harmonics of the unit’s reference crystal at 18 MHz can internally interfere
with received signals at frequencies that are exact multiples of 18 MHz: 396, 414, 432,
450, and 468 MHz. To minimize the potential of harmonic interference, avoid using
frequencies that are multiples of 18 MHz.
Exporting a channel table
After you build a receive-only channel table, click Export to save it to your computer.
Note – Only your dealer can create or edit a channel table that allows data transmission.
Region Codes
Different countries and regions require radios to be configured in slightly different
ways. to configure your ADL radio to meet your country’s or region’s regulations. Only
authorized Pacific Crest dealers are able to edit the region code. If you feel the selected
code is not appropriate, please contact your dealer.