Spectra Precision ProMark 800 - Manual (Page 12)

English
8
USB Port
A nine-contact female connector (Fischer type). Depending
on how it is configured, the USB port can be used in two
different ways:
1. For a USB host such as a mass storage device. In this
case, you should use the special adaptor cable provided
(P/N 702103) to attach the USB key to the ProMark 800.
This configuration can be used to log raw data on the USB
key or upgrade the ProMark 800 firmware from the files
stored on the key.
2. For a USB device allowing ProMark 800 to be seen as a
disk from the computer connected to this port. In this
configuration, files can be transferred between the
ProMark 800’s internal memory and the computer using
the USB cable provided (P/N 702104).
RS232/422 Serial Port
A seven-contact female connector (Fischer type) allowing you
to connect the ProMark 800 to an external device via an
RS232 or RS422 serial line (default: RS232), as explained
in the ProMark 800 Reference Manual.
Bluetooth Device
An integrated Bluetooth module allowing the ProMark 800 to
communicate with a Bluetooth-enabled field terminal
through a wireless connection.