Memo for gnss users – Spectra Precision Survey Pro v5.1 User Manual

Page 71

Advertising
background image

65

Memo for GNSS Users

•

You are using the following equipment:

– a Bluetooth-equipped Spectra Precision GNSS receiver capable of

detecting automatically the format of received corrections.

– A data collector fitted with Bluetooth and an embedded GSM modem.

•

You are working in a network (remote base) over the Internet.

•

You are using a known coordinate system (and possibly a geoid).

•

You want to start your project from a new, empty job file.

Surveying with Survey Pro may be summarized as follows:

•

Turn on your receiver.

•

Start Survey Pro on the data collector.

•

Create a job in which you select the coordinate system (and geoid) used.

•

Tap the instrument icon and select

Switch to GNSS.

•

Tap

Add Receiver, search for Bluetooth devices, set Survey Pro for a

Bluetooth connection with the receiver.

•

Tap

Connect.

•

Set the data link for the rover to be able to receive corrections from the
network.

•

Go to

GNSS Status and check that enough satellites are received.

•

Go to

Survey >Start Survey.

•

Tap

Connect to re-connect to your receiver.

•

Wait until the rover receives data from the base.

•

Confirm/change the point where the base is located.

•

Set acceptance criteria for all your measurements.

•

Make sure the receiver continuously delivers a “Fixed” position solution.

•

Start collecting your data (points, offset points, lines). Data may be
collected using one epoch of data (always the case when collecting data
along a line), or by averaging the position through a static occupation on
each point.

•

When finished, select

End Survey on the Home screen.

Advertising