What to do next – Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual User Manual
Page 145
Screen Examples
137
What to Do Next
With the azimuth to the backsight known, you can now perform the
following steps to begin your survey.
1.
Without moving from the occupy point used while performing the
solar observation, note the computed average azimuth from the
Solar Observation Results screen.
2.
From the Main Menu, access the
6XUYH\ , %DFNVLJKW 6HWXS
screen.
3.
Toggle the
%6 3RLQW / %6 'LUHFWLRQ button to %6 'LUHFWLRQ and enter
the computed azimuth in that field.
Tip: You can use the
power button and select the
Past results…
option or press or use the ,
3DVW 5HVXOWV Quick Pick to select and
automatically enter the azimuth computed from the sun shot earlier.
4.
Fill in the remaining fields with your current information and tap
6ROYH.
5.
Access the
6XUYH\ , 7UDYHUVH 6LGHVKRW screen (or use the ,
7UDYHUVH 6LGHVKRW Quick Pick), aim toward the backsight used
during the solar observation, zero your horizontal angle on the
total station and tap either
6LGH 6KRW or 7UDYHUVH. The data
collected should be aligned correctly with true north or your local
state plane coordinate system.