Triangle Engineering of Arkansas AQ3613 - Manual (Page 6)

Completely dry pads daily to curb algae growth. Clean and flush sump on a
regular basis - at least 1- 2 times per week of heavy use.
PAD INSTALLATION
In order to get the best performance from your cooling pads, they must be installed
properly.
Pads must always be installed with the steeper flute angle sloping down toward the air
entry side. The steeper angle puts more water on the hot, dry side of the pad where it is
needed most. this counteracts the tendency for air to push the water toward the back of
the pad.