Triton RT2000 User Manual - Manual (Page 67)

4 7
M
ANAGEMENT
F
UNCTIONS
A
CCESS
I
NSTRUCTIONS
:
1. From the MAIN MENU screen,
select the TERMINAL CLOSE
FUNCTIONS option by press-
ing number (1) on the keypad.
2. To access the SCHEDULE
CLOSE function, press the num-
ber (1) on the keypad.
S
CHEDULE
C
LOSE
F
ACTORY
D
EFAULT
: OFF
D
ESCRIPTION
:
This function allows you to turn ON or OFF the S
CHEDULE
C
LOSE
function and to
specify a time of day at which a close operation will be performed.
If the Enable Schedule option is ON, a Day Close will be automatically initiated at the
specified time of day. If the checkbox is checked, the option is ON. If the checkbox is
not checked, the function is OFF. Press the number (1) key to switch the checkbox
between ON (checked) and OFF (not checked).
Use the number (2), (3), (4), and (5) keys to choose the hours, minutes, seconds, and
AM/PM settings at which the scheduled close is to be performed. Pressing a key
repeatedly will cause the associated field to cycle through the available values. The
current time setting appears in a small text window below the time set buttons. Use
the number (6) key to select a specific day of the week (Sunday, Monday, Tuesday,
etc.), or a a setting of E
VERYDAY
, to determine the day(s) of the week to which the
scheduled time applies.
Press Enter to accept the Schedule Close settings and return to the Terminal Close
Functions main dialog window or press Cancel to exit withou
t making any changes.