Triton RL5000 Installation Manual User Manual
Page 27
2 7
C
ABINET
I
NSTALLATION
- C
HEMICAL
A
NCHORS
3.
Remove the loose packing material
from inside of the box.
4.
Remove the silver key from the
white plastic bag attached to the
ATM wrapping.
5.
Stand the unit up and walk it out of
the shipping carton.
6.
Remove the wrapping from the
ATM.
7.
Use the silver-colored key to
unlock both the control panel and
the fascia door (which conceals the
locking mechanism) on the front of
the cabinet. Open the fascia door.
8.
Turn the handle on the locking
mechanism to open the front
enclosure door. If the door is
locked, see the sidebar on this page
for help in unlocking the electronic
lock.
9.
Remove the accessory kit from
inside the bottom enclosure; open
and inspect the contents. Check
the contents against the enclosed
packing list. Report any missing
parts to Triton immediately.
UNLOCKING
ELECTRONIC
LOCKS
ELECTRONIC LOCK
.
Upon
arrival, the combination of the
lock should already be preset to
1-2-3-4-5-6. To unlock, enter the
preset combination and check
for proper operation. After each
keypress, the lock will beep.
After the final digit has been
entered, the lock will beep twice
and the open period will begin.
When a valid combination has
been entered, the operator will
have approximately 3 seconds
to open the lock. To open the
lock, turn the dial clockwise.
After the lock is opened, the
door latch may be turned and
the safe opened.