U.S. Sunlight 8912VK Garage Ventilation Kit - Manual

© Copyright 2013 US Sunlight Corp, Inc. 8912VK C01 ver 1
8912VK Garage Ventilation Kit
Installation and Mounting Guide
Thank you for purchasing a Ventilation Kit from U.S. Sunlight Corp. We are committed to providing alternative energy products
that can improve your everyday life and our environment. We have reduced packaging material and eliminated Styrofoam to
reduce the impact on landfills.
If there is a problem with your U.S. Sunlight product call us at 1-877-50-USSUN
Spare parts, installation advice, or recommendations for professional installers in your area are only a phone call away.
Professional installation may be much less than you expect, please call us to get average rates for your area.
Please note that this product is designed for asphalt shingles. If you have spanish tile, s-tile, concrete, metal or flat roof,
please call us before attempting to install the product.
Before beginning the installation of your Ventilation Kit, please read through the entire installation instructions and call us
if you have any questions.
This product requires the additional purchase of a U.S. Sunlight Solar Attic Fan. Call 1-877-50-USSUN to order.
Tel: 877-50-USSUN
www.ussunlight.com
[email protected]
Fig. 1
height
6”
Fig. 2
height
Step 1
Measure the distance between the underside of the roof and the top of the ceiling (fig.1). Add 6” to this and cut
the flexible tube to length. (fig. 2)
Step 2
Rivet the two ends of the collars together to form two separate rings. (fig. 3a and 3b)
Fig. 3a
Fig. 3b