Actiontec electronic 1394 - Manual (Page 11)

10 Configuring Windows 98
Checking the installation in Windows 98
Next, find out if the 1394 FireWire Card has been properly
installed and configured for use with your operating system.
Step 1 On the Windows desktop, right-click the icon for My
Computer. In the dialog box that appears, click the
Device Manager tab.
Step 2 The Device Manager will be displayed, listing the
kinds of devices that are connected to your system.
Click the plus (+) sign next to “1394 Bus Controller”
to expand that section of the listing.
The highlighted area shown above should match the
same section of the listing displayed by your com-
puter. If so, the 1394 FireWire Card has been
installed correctly. See “Connecting Devices to the
Actiontec 1394 FireWire Card” on page6 to connect
FireWire devices to the card.