Video Mount Products PMC-S - Manual (Page 7)

Step 16
Lift the hooks of the bottom box PMC-S onto the running shafts
PMC-S. Then swing the bottom box PMC-S up so the holes on the
top plate PMC-S line up with the slots on the bottom box PMC-S.
Secure the bottom box in place using the M6 security screws PMC-S.
Step 17
Maintenance Notes: For maintenance of the projector the bottom box
PMC-S can either be lifted off the top plate PMC-S or the box can
be swung on the hooks in the rear of the of the bottom box.
WARNING: Be
careful not to stand directly underneath or behind the bottom box when
you remove the security screws as the box will swing down abruptly.
WARNING: The installer of these products must verify that the mounting
surface, ceiling or wall, will safely support the combined weight of all
attached equipment and hardware. Video Mount Products will not be
held liable for the improper use or installation of its products.
Enjoy Your Mount!
Key:
PMC-S
VIDEO MOUNT PRODUCTS
AK-1
Step 16 : Attaching the lower cage
5
2 5
1 5
7
5 1