Vitrex MIXTWIN - Manual (Page 2)

02 03
Tel: +44 (0) 1253 789180 Tel: +44 (0) 1253 789180
Owner’s Safety and Operating Manual
Contents
Safety Instructions ...............................................3-4
Assembly & Operating Instructions ..........................5
Maintenance & Warranty ........................................6
Machine Specification..............................................7
Safety Instructions
PRODUCT DESCRIPTION
The machine has been designed to mix liquid and
powdery building materials such as paint, adhesives,
plaster mortar and similar substances. Up to 200Ltr
mixing volume. The relevant mixing action (which
depends on the consistency of the materials and the
quantity that has to be mixed) must be set up for the
appropriate mixing tool.
This manual must be kept in a safe place so that the
information that it contains is always available. This
operating manual must accompany the equipment if it
is transferred to somebody else.
We do not accept any liability for accidents or
damage arising from ignoring this manual and the
safety instructions.
SAFETY INSTRUCTIONS
When using power tools, you must observe the
following basic safety precautions in order to ensure
protection from electric shocks, injury and fire.
Read and follow all the instructions before using this
power tool. Look after the notes on safety.
The machine has been double-insulated in accordance
with EN60745: therefore, an earth wire is not necessary
USE CORRECT SUPPLY VOLTAGE:
The power supply voltage must match the information
quoted against the tools.
Use of an approved RCD circuit breaker between
the machine and the electrical power point is highly
recommended.
USE PROPER EXTENSION CORD:
Only use an approved extension cable that is suitable
for the machine’s power.
When the extension cable is on a reel, unroll the cable
in its entirety.
SWITCH OFF THE MACHINE IMMEDIATELY IN CASE OF:
1. Malfunction in the mains plug, power cable or
damaging of cable.
2. Broken switch.
3. Smoke or strong smell of burning.
GENERAL SAFETY RULES
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create
sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed surfaces, such as
pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is earthed.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
TWIN PADDLE
POWER MIXER
POWER MIXER TWIN PADDLE
POWER MIXER TWIN PADDLE Manual.indd 2 14/12/2011 11:30