Wellsaw 1316S-SA - Manual (Page 2)

2
Specifi cations
Capacity
@ 0° (90°)
@ 45°
@ 60° Round | Rectangular
13" | 13"H x 16"W
12" | 13"H x 12"W
7-1/2" | 8-1/2"H x 7-1/2"W
Blade Size 1" x .035" x 12'6" (150")
Blade Speeds Infi nitely Variable 60-420 SFPM
Blade Guides Carbide Guides with Rollers
Blade Tension Manual Rite-Tension
Electrical Options 115-208/230/60/1
208-230-460/60/3
Coolant System Tank Capacity 8 Gallons
Submersible Pump 115V/.6 Amp/3
GPM
Vise Control Quick Positioning/Air Powered
Feed Rate Control Variable Positive Hydraulic with
Counterbalance Spring
Stock Stop Projec-
tion 25”
Bed Height 35"
Floor Area 90"W x 76"L
Shipping Weight 1800 Lbs.
1316S-SA Components
• Plc Controlled, Full Cycle Semi-Automatic
• Saw Head Swivels on Precision Ball Bearings
• Miter to 60 degrees
• Large Protractor for Accurate Angle Selection
• 5’ x 18” Infeed Roller Conveyor
• Work Light with Transformer
• Variable Hydraulic Feed Rate Control
• Baldor® Motor
• 3hp Motor 3 Phase TEFC
• 2hp Motor 1 Phase ODP
• Magnetic Starter with Overload and Undervoltage Protec-
tion
• Spring-Loaded Carbide Guides with Rollers
• Conbination Reduction Gearbox and Perimeter Ring Gear
Blade Drive
• Infi nitely Variable Blade Speeds
•
Rite-Tension Blade Tensioning Device
• 8 Gallon Flood Coolants System with Sample/Start-Up Cool-
ant
• Full Surround Chip Pan
• Powered Blade Brush
• 110 Volts at Controls
• Overload and Undervoltage Protection
• Precision Ground Bed and Vise Jaws
• Auto Shut-Off at End of Cut
• OSHA Blade Guarding
• Tiger Tooth Bi-Metal Blade
Available Factory Options
Flush Hose with 8.5 GPM Pump | Blade Break/Stall Switch
| Casters | NFPA Electrics (with Disconnect) | Laser Line
Pointer | 5' and 10' Non-Powered Conveyors | Contact
Factory for Additional Options
Wellsaw® | 2829 N. Burdick Street | Kalamazoo, MI 49004 | Phone: 269-345-1132 | Fax: 269-345-0095 | Web: www.wellsaw.com
1316S-SA Specifi cations ..................................................... 2
1316S-SA Components ...................................................... 2
Safety Warning ...................................................................... 3
Set up and Operation ......................................................... 8
Frame Assembly ...................................................................10
Cylinder Assembly ..............................................................20
Bed Assembly .......................................................................12
Table Assembly ....................................................................14
Base Assembly ......................................................................16
Blade Guide Assembly..................................................22,24 Blade Tension Mechanism ................................................26
Blade Brush Assembly .......................................................31
Valve & Manifold Detail .....................................................20
Motor & Gearbox .................................................................28
Coolant System ....................................................................30
Control Panel.........................................................................32
Electrical Panel Components ..........................................33
Electrical Schematic ...........................................................34
Blade Selection Guide........................................................35
Table of Contents