WEN 3400 Dust Extractor - Manual (Page 4)

4
Tool Should Be Maintained
1. Always unplug tool prior to inspection.
2. Consult manual for specific maintenance and adjustment procedures.
3. Keep tool lubricated and clean for safest operation.
4. Remove adjusting tools. Form habits of checking to see that adjusting tools are removed
before switching the machine on.
5. Keep all parts in working order. Check to determine that the guard or other parts will operate
properly and perform their intended function.
6. Check for damaged parts. Check for binding, breakage, mounting, misalignment of moving
parts, or any other condition that may affect a tool’s operation.
7. A guard or other damaged part should be properly repaired or replaced. Do not perform
makeshift repairs (use the parts list provided to order repair parts).
Know How to Use Tool
1. Use the tool for right job. Do not force a tool or attachment to do a job for which it was not
designed.
2. Disconnect the tool when removing filter or collector bags.
3. Avoid accidental startups. Make sure that tool switch is in the off position before plugging in.
4. Do not force the tool. It will work most efficiently at the rate for which it was designed.
5. Leave hands free to operate machine. Protect hands from possible injury.
6. Never leave a tool running unattended. Turn the power off and do not leave until the tool
comes to a complete stop.
7. Do not overreach. Keep proper footing and balance.
8. Never stand on the tool. Serious injury could occur if the tool tips over.
9. Keep hands away from moving parts.
10. Know your tool. Understand the tool’s operation, application, and limitations.
ELECTRICAL INFORMATION
Grounding instructions
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of
least resistance for electric current and reduces the risk of electric shock. This tool is equipped
with an electric cord that has an equipment grounding conductor and a grounding plug. The plug
MUST be plugged into a matching outlet that is properly installed and grounded in accordance
with ALL local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet
installed by a licensed electrician.
IMPROPER CONNECTION of the equipment grounding conductor can result in electric shock.
The conductor with the green insulation (with or without yellow stripes) is the equipment
grounding conductor. If repair or replacement of the electric cord or plug is necessary, DO NOT
connect the equipment grounding conductor to a live terminal.