Alliance Laundry Systems UW35PV - Manual (Page 13)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Specifications and Dimensions
11 F232084
Machine Dimensions
Dimensional Clearances
Allow a minimum of 24 inches (60 cm) at the rear and
18 inches (45 cm) at the sides for maintenance,
inspection, and adjustment. Allow at least 18 inches
(45 cm) between machines in multiple installations.
Machine dimensions are indicated in Figure 3,
Figure 4 and Table 1.
NOTE: The dimensions shown here are for
planning purposes only. They are approximate and
subject to normal manufacturing tolerances. If
exact dimensions are required for construction
purposes, contact the distributor or the
manufacturer. We reserve the right to make
changes at any time without notice.
Crush hazard.
To avoid personal injury and/or property
damage, do not tip the UW150 machine
more than 25 degrees in any direction.
W642
WARNING
UWPV Pocket Hardmount Machine Dimensions (Refer to Figure 3 and Figure 4)
Dimension
35 60 80 100 125 150
in mm in mm in mm in mm in mm in mm
A 30.12 765 35.63 905 41.12 1045 41.12 1045 48 1219 50.25 1277
B
1 33.39 847 36.63 930 41.5 1054 41.5 1054 48 1219 50.25 1277
C 23.75 603 28.25 718 29 737 29 737 29 737 32 813
D 43.63 1108 45 1143 51-1/2 1308 54.5 1384 58 1473 63 1600
E
2 1/2 13 1 25 3 76 3 76 1.5 38 2.9 73
F 55.5 1410 64.5 1638 68-1/2 1740 68.5 1740 72 1829 79 2007
G 2 36 914 36 914 43-3/4 1111 43-3/4 1111 48 1219 56 1422
H 8 203 15.52 394 16-7/8 429 16-7/8 429 11-3/8 289 15.75 400
J 43.88 1114 55 1397 58-1/2 1486 58-1/2 1486 63-3/8 1610 70 1778
1 Overhang dimensions for the optional starch dispenser are as follows:
UW35PV, 3.88 inches (9.86 cm); UW60PV, 1.75 inches (4.45 cm);
UW80PV and UW100PV, 0.33 inch (0.83 cm). (The starch dispenser does not overhang the UW125PV.) (No longer available.)
2 The overhang dimension for the premium wet clean module option (compatible with wet-clean-capable washer-extractors only) adds 24 inches (60.96
cm) to combined machine dimensions E and G.
Table 1