American Weigh Scales AMW-TC200 - Manual (Page 3)

Parts Description
1. LCD Display
2. CLOCK button
3. ALARM button
4. UP button
5. Tempered Glass
6. Scale foot
7. AAA Battery Compartment
8. Speaker
I. Setup
Remove the main unit from the package. Insert four AAA
batteries (included) into the AAA battery compartment (see
above). You can now set the clock as follows:
1. Press and hold the CLOCK button for 2 seconds. The hour
digit will begin to flash. You can increase the hour digit by
pressing the UP button. Holding the UP button will change
digits faster.
2. Press the CLOCK button again to set up the minutes. The
minutes digit will flash. Use the UP key to increase the minutes.
Press CLOCK when finished to return to normal clock mode.
3. If the CLOCK key is pressed and no other key is pressed
within 20 seconds, the scale will return to clock mode.
5
2 3 4
1
6
7
8
Top
Bottom