American Weigh Scales CP-300 - Manual (Page 5)

3. Setting the Clock
a. While in normal "Clock Mode", press and hold the
B button.
b. The clock's hour and minute digits will flash.
c. Press button A to increment the hours by one. Hold
to go faster.
d. Press button C to increment the minutes by one.
Hold to go faster.
e. Press the B button when you are finished setting.
4. Setting the Timer
a. While in "Timer Mode" ( ), press and hold the B
button.
b. The timer's hour and minute digits will flash.
c. Press button A to increment the hours by one. Hold
to go faster.
d. Press button C to increment the minutes by one.
Hold to go faster.
e. Press the B button when you are finished setting.
5. Using the Timer
a. After setting the timer, press the C button to start the
countdown.
b. Press the C button again to stop it.
V. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating under unstable conditions. Please keep this
in mind and maintain and operate your scale properly.