Aposonic A-S1604R20A - Manual (Page 32)

- 32 -
5.5 Backup Device
In Menu display, press ▲▼◄► to change the highlighted option to Backup Device,
and then press ENTER to call up Backup Device display as shown below.
The system supports
internal DVD for Internal DVD models and a variety of USB
2.0 storage devices, including Storage Disk such as USB 2.0 storage disk drives and
DVD Disc (including DVD+RW, DVD+R, and DVD-R) . (DVD-RW is not
supported.) The operations are as below:
 ▲▼◄►
Press these buttons to select the items.
 ESC
(Mouse: Right Click)
Press this button to escape from this screen, and return to previous display.
 MODE
Eject the tray and disconnect. (for Internal DVD only)
 SEQ
Load the tray and connect. (for Internal DVD only)
 Connect/Disconnect – If the specific backup device is disconnected (as shown in
Current Status), please plug the USB device in one of the USB ports of the system
and/or insert a DVD for DVD device, and then press ENTER
(Mouse: Left
click) to command the system to connect with the device. If the specific device
is already connected (EX. Read/write, as shown in Current Status), please press
ENTER
(Mouse: Left click) to command the system software to disconnect
with the device, and then unplug the backup device from the backup port.
Note 1:
Please DO NOT format the DVD disc for better performance and