Avigilon ACC Server Version 5.2 User Manual
Page 30
Avigilon Control Center Server User Guide
If you recently chose to
Erase All Data
, you must reset the Storage configuration before you may
continue.
Complete the following procedure in the Storage dialog box:
If the Storage dialog box is not already open, see
Accessing the Server Storage Configuration
information.
1. In the Storage dialog box, select the drive for storing the Config Volume and click
Set Config
Volume
.
Figure A.
Storage dialog box
Note:
Some of the buttons in the figure may not be available if the drive cannot
accommodate the setting.
2. To add a data volume, select the drive and click
Add Data Volume
. The button is not available if
the drive already has a data volume.
o
In the Add Data Volume dialog box, enter the preferred data volume size then click
OK
.
26