Avigilon ACC Core Version 5.2.2 - Manual (Page 77)

To... Do this...
The tour will repeat until stopped or until other PTZ controls
are used.
Activate an auxiliary command
1. Select an aux command number and click .
2. Click to turn off the auxiliary output.
Display the PTZ camera on-screen menu
1. Click .
2. To move through the menu options, click any of the
following:
l
Click to move down the options.
l
Click to move up the options.
l
Click to confirm your selection.
l
Click to cancel your selection.
Lock the PTZ controls
Click .
Other users will be unable to use the PTZ controls for this
camera until you unlock the controls or log out.
Programming PTZ Tours
If the PTZ camera supports guard tours, the tours can be programmed through the PTZ controls pane. Tours
allow the PTZ camera to automatically move between a series of preset positions, and can be set to pause at
each preset for a specific amount of time for video monitoring.
1. Create all the PTZ presets you need for this tour.
2. In the PTZ Controls pane, select a tour number then click . The Edit PTZ Tour dialog box is displayed.
Programming PTZ Tours 77