Avigilon Access Control Manager Integration - Manual (Page 5)

Installation
Alarm Gateway Component Requirements
Before you install the Alarm Gateway component, make sure the Control Center Server and the Access Control
Manager software are installed on the same network. The Alarm Gateway component can be installed on any
workstation that is connected to the same network.
VidProxy Component Requirements
The VidProxy component must be installed on the same server as the Control Center Server software.
Installing the Integration
Both the Alarm Gateway component and the VidProxy component can be installed from the same installer.
By default, both components are automatically selected to install together. If the integration must be installed at
separate locations or if you only need one of the components, make sure you only install the component that is
required.
1. Run AvigilonAcmIntegration.exe.
2. Follow the prompts until you arrive at the following page:
Installation 2