Avigilon Paxton Net2 Integration - Manual (Page 3)

Table of Contents
Introduction 1
Requirements 1
For More Information 1
Installation 2
Installing the Avigilon™ Alarm Gateway Software 2
Installing the Avigilon™ Video Integration Software 2
Preparing for the Integration 3
Adding an Integration User in Paxton 3
Adding an Integration User in Avigilon™ Control Center 3
Adding Avigilon™ Alarms 3
Configuring The Video Integration 5
Assigning Logical IDs to Cameras 5
Adding Avigilon™ Sites and Cameras to the Paxton Net2 Software 5
Configuring Paxton Net2 for Live Video 6
Configuring the Avigilon™ Alarm Gateway 7
Configuring Server Settings 7
Mapping Alarms 8
Backing Up Mapped Alarms 9
Restoring Mapped Alarms 9
Using the Integration 10
Monitoring Video 10
Monitoring Alarms 10
Troubleshooting 11
Cannot Add Avigilon™ Cameras to Paxton Net2 11
Mapped Avigilon™ Control Center Alarms Displayed as Unknown 11
Cannot Save Changes in the Configuration Tool 11
Incorrect Video Displayed in Paxton Net2 12
Invalid Camera Appears in Paxton Net2 Camera List 12
Cameras Not Listed After Being Added to Paxton Net2 12
iii