Avigilon Hirsch Velocity Integration - Manual (Page 11)

Avigilon Control Center System Integration Guide with Hirsch Velocity
8
Avigilon Hirsch Gateway
The Avigilon Hirsch Gateway is composed of two parts: the Avigilon Hirsch Gateway Windows
service that runs automatically in the background, and the Avigilon Hirsch Gateway configuration
application that is used to configure the connection and alarm mappings between the Hirsch and
the Avigilon systems.
NOTE: Whenever the Avigilon Hirsch Gateway configuration application is opened, the Avigilon
Hirsch Gateway service is stopped.
Configuring Server Settings
Configure the Avigilon Hirsch Gateway to access the two applications.
The Avigilon Hirsch Gateway configuration application remembers the server configuration, so
you do not need to repeat this procedure if the settings remain the same.
1. Open the Avigilon Hirsch Gateway software. Select Start > All Programs > Avigilon >
Avigilon Hirsch Gateway.
2. Complete the following fields: