Avigilon Lenel On Guard Integration - Manual (Page 10)

Avigilon Control Center System Integration Guide with Lenel OnGuard
7
5. If you want motion alarm events to be displayed, select the Display Motion Detection
Alarms check box.
6. Leave the PTZ controlled by Matrix Switches field empty.
If you have a PTZ camera, the PTZ controls are automatically enabled in the OnGuard
software.
7. Click OK.
8. Repeat this procedure for each Avigilon camera.
Adding All Cameras on a Server
If you are using Lenel OnGuard version 6.5.624 or 6.6.286, you have the option to import all
available cameras at once.
1. In the Video Recorder tab, right-click the connected Avigilon server and select Import
From Recorder.
2. In the following dialog box, select all the cameras you want to import.
NOTE: Only cameras with logical IDs are listed.See Assigning Logical IDs to Cameras on page 3
for more information.
• Click a camera on the Available list to add it to the Import list.
• Or, click Select all to add all available cameras to the Import list.