Avigilon Stentofon AlphaCom XE Integration - Manual (Page 5)

Avigilon Control Center System Integration Guide with STENTOFON AlphaCom
2
Installation
Server
Install the following on any server that has access to an AlphaCom server through your network.
1. The Avigilon Control Center Server software.
2. The Avigilon Stentofon Gateway software integration
Client
Install the following as needed:
• Install the Avigilon Control Center Client software on the computers that require
access to the Avigilon Control Center System
Checking the License
After you have installed all the required software, you can check if the ACC-STENTOFON-NVR
licence has been properly applied:
1. Open the Avigilon Control Center Admin Tool.
2. Select the Settings tab and click Licensing. The License Activation dialog box
appears.
The dialog box must say Integration Connections: Yes or the software was not properly
licensed.