Audiovox NPD 5500 User Manual
Page 12
Entering the activation code
Once you receive your code, enter it into the system.
u
In the Start menu, activate ”C-IQ”, followed by ”Code input”.
Press OK each time.
u
Move the cursor to the desired characters or numbers, confirming
each selection by pressing the OK key.
u
Once the code is complete, the cursor automatically moves to OK.
Press OK to accept.
The system will let you know if an incorrect code is entered and/or if your
system software is incapable of processing the encrypted information.
u
In such cases, press either ”OK” or ”C-IQ Service”, if you wish to
contact someone, then press OK.
t
The system can be used on a 500 miles scale without activation. You
may enter destinations, however, navigation information will be
displayed only in activated areas and/or for activated services.
My C-IQ
At any time, you can find out about the activation status.
u
Select ”My C-IQ” below ”C-IQ” and press OK.
u
Select ”Active” and confirm by pressing OK if you want to see
details about your selected products.
u
Select ”Starting soon” and confirm by pressing OK if you want to
see details about software you’ve already received.
u
Select ”Expiring soon” and confirm by pressing OK if you want to
find out which services you are presently using and how much
longer they will be available to you.
u
Select ”Returned” and press OK to receive information about
previously activated products.
If you do not make a selection, the system returns automatically to the
previous menu after a short time.
13
GENERAL INFORMATION
English