Catskill Craftsmen 1446 User Manual

Page 3

Advertising
background image

1

Assembly is easiest if you invert the Harvest table. Utilizing the 2” Hex
screws, attach the Upper Front & Back Braces to each side. Then attach
the Lower Center Brace, also using the 2” Hex screws. Make sure the
counter sunk side of the holes are facing out on both sides, as wooden
plugs will be tapped into place in a later step.

Counter sunk side of holes must
point outward on both sides to
allow for wooden plugs.

Model 1447/1446 Assembly Instructions

To make the assembly of your new Catskill Craftsmen unit go as smoothly as possible, lay
out all of the components prior to beginning assembly. Make sure you have all the pieces
necessary, if there are any missing or damaged parts, call us at 607-652-7321 for
replacements. Read instructions thoroughly before beginning assembly to make sure you
have a full comprehension of how to proceed from step to step.

3

Advertising
This manual is related to the following products: