Catskill Craftsmen 1576 - Manual (Page 13)

A. Stick magnet to magnet plate on right door.
B. With left door open, close the right door. The magnet should be positioned over the wooden block
on the bottom of the top front brace. Hold the magnet in place with your thumb, and open the right
door. The magnet will be in the correct position on the block.
C. Secure magnet with the two round head screws in the magnet packet. Center screws in the slots in
the magnet . This will allow adjustment later, if needed.
NOTE: No pilot holes in block, as softwood!
Magnet (1)
5/8” Pan Head Screw (2)
2 Used
in this step
STEP 10
5/8” Wooden disk