Catskill Craftsmen 2008 - Manual (Page 8)

STEP 5
ATTACH TABLE TOP
A. With the top still inverted, invert the leg
assembly onto the top as shown. Secure top
to leg assembly with 5/8” #6 screws through
L-brackets.
STEP 6
ATTACH CASTERS
A. With unit still inverted, tap Caster
Sockets into holes in leg ends until
seated then tap in the Casters.
STEP 4
TABLE TOP PREPARATION
A. Invert table top on smooth, flat surface. Attach the 4 L-Brackets with 5/8” #6 screws, using the
round hole as shown in Illustration 4B.
B. Attach the 3 hinges with 5/8” #8 screws. Attach
drop leaf supports with 5/8” #8 screws
as shown in illus. 4A.
Make sure the round
hole is used to attach
the L-Bracket to the
bottom of the table top
Illustration 4B
Illustration 4A
You must use the smaller hole, furthest from the edge
for L-bracket attachment, as shown in illustration 4C.
Illustration 4C