Step 9 – Catskill Craftsmen 43017 User Manual
Page 9
Advertising
STEP 9
A. Tap/insert ONE 1 1/2 pin into each end of both doors. DONT OVERDRIVE PINS! Pins should
stick up about 1/2 when seated.
B. Attach the magnet plate (may be stuck to magnet! ) with the 1/2 #4 screw to the top of the
right door. Bumps go toward the wood.
C. Attach door handles with 7/8 truss head machine screws.
1 1/2 Long 3/16 DIA. Steel Pin (4)
4 used in
this step
ILLUSTRATION 9
7/8 Truss Head Machine Screw (8)
4 used
in this step
1/2 Phillips Flat Head #4 Screw (2)
2 used in this step
Advertising