Axxess Interface ASWC - Manual (Page 15)

15
4) Press and release the “Volume Up” button for the desired radio
number (please refer to the ASWC legend). For each press the
red LED. It will go “on” and then “off” when released for feedback.
5) When the desired radio type has been reached, Press the
“Volume Down” button.
6) The LED will go on and will remain on (approximately 3 seconds).
The ASWC is internally computing and storing this new information.
7) The LED will go “off” indicating it is completed.
Note: If at any time the user fails to press any button for a period
of 10 seconds or more, this programing mode will abort.
Section 3: Troubleshooting