Catskill Craftsmen 64228 - Manual (Page 5)

A. Tap/insert ONE 1 1/2” pin into each end of all the doors. DON’T OVERDRIVE PINS! Pins should
stick up about 1/2” when seated.
B. Attach the magnet plate (may be stuck to magnet! ) with the 1/2” #4 screw to the top of the doors.
Bumps go toward the wood.
C. Attach door handles with 1” truss head machine screws.
ILLUSTRATION 1
STEP 2
A. Take the 2 front braces and tap/insert one 3/4” steel pin into each end of both braces until
seated. About 3/8” will stick out when seated. OK if loose.
ILLUSTRATION 2
STEP 1