COSA Xentaur COSA 9610 - Manual (Page 12)

INSTALLATION, OPERATION AND MAINTENANCE MANUAL – COSA 9610™
Page 12 of 44
2. INSTALLATION
2.1. G
ENERAL
Upon receipt and unpacking of the COSA 9610™ a visual inspection must be carried out
to check for any visual damage, caused by transport. Any damage must be reported
immediately to:
COSA INSTRUMENT CORPORATION
New Jersey Office: Texas Office:
55 Oak Street 7125 North Loop East
Norwood, NJ 07648 Houston, TX 77028
Tel: 201-767-6600 Tel: 713-947-9591
Fax: 201-767-6804 Fax: 713-947-7549
New York Office: E-mail:
84G Horseblock Rd. [email protected]
Yaphank, NY 11980
Tel: 631-345-3434
Fax: 631-345-5349
We kindly ask you to submit photographs of the damage.
If the COSA 9610™ is supplied by the COSA INSTRUMENT CORPORATION, as part of a
complete package and built into a shelter or house, installation may differ from
hereunder described.
2.2. S
TORAGE
The COSA 9610™ must be stored frost-free and at a maximum temperature of 122ºF
(50°C), preferably in it’s original packing, and protected against direct sunlight and (rain)
water.
2.3. P
LACEMENT
2.3.1. General
The COSA 9610™ can operate under ambient conditions between +41º F (5°C) and
+113ºF (45°C) and a maximum humidity of 90%.