DeFelsko PosiTector DPM v.2.0 - Manual (Page 14)

14
This image appears if the memory of the
instrument has become corrupt. This can
occur in the event that the batteries were removed
while the instrument was powered-on and was not
able to self power-down. If this message appears it
will be followed by a full reset. All readings in
memory will be erased and instrument settings will
be reset to "out-of-the-box" settings.
To retain all user settings and stored memory
readings, only replace the batteries after the instru-
ment has automatically powered-down.
-Nickel-cadmium and nickel-metal hydride recharge-
able batteries will work but the instrument may
appear to have weak batteries.
Changing The Batteries Changing The Batteries
The battery icon displays four bars with fresh
alkaline batteries installed. As the batteries weaken,
the number of bars will be reduced. When the batter-
ies become very weak the Power Warning
image will display and the instrument
will automatically power-down. To
maintain user settings and stored
measurements, the batteries must be
replaced. USE ONLY “AAA” ALKALINE
BATTERIES
NOTES:
Power Warning