Care of your meter, Service for your meter, Warranty – Delmhorst Instrument BD-2100 User Manual

Page 9

Advertising
background image

The presence of moisture in insulating material greatly
reduces its insulating properties. If the insulating material
absorbs moisture, water will displace the air in the material.
Water also transmits heat at a faster rate than air, thus
reducing the efficiency of the insulation.

Side walls and roof insulation pick up moisture because
of leaks in the roof or structural defects in the side walls
which allow storm water to be forced in during high
wind. During periods of cold weather, vapor will condense
as it approaches the colder area near the outside walls,
and resulting moisture will remain trapped in the insulation.

Cork, wood fiber boards, and other cellulose material read
lower than glass wool and other inorganic types of insulation.

CARE OF YOUR METER

To keep your meter in good working order:

hStore your meter in a clean, dry place. The protective

carrying case provided is an ideal storage place when the
meter is not in use.

hChange the 9-Volt battery as needed. Continued use with a

low battery may cause the meter to go out of calibration.

hChange contact pins as needed. Keep pin retainers hand

tightened.

hClean the meter and contact pins with any biodegradable

cleaner. Use the cleaner sparingly and on external parts
only. Keep cleaner out of the external connector

&

.

hRemove the battery if the meter will not be used for one

month or longer.

SERVICE FOR YOUR METER

If your meter is not working properly, replace the battery with a
new one and check the calibration. If this does not resolve the
problem, go to www.delmhorst.com and follow the instructions
under the Product Support tab.

If you require further assistance please call 877-DELMHORST
(334-6467) or 973-334-2557.

14

WARRANTY

Delmhorst Instrument Co., referred to hereafter as
Delmhorst, guarantees its BD-2100 meter for one year from
date of purchase and any optional electrodes against defects
in material or workmanship for 90 days. If, within the
warranty period, you find any defect in material or workmanship
return the meter following the instructions in the

Service for

Your Meter section. This limited warranty does not cover
abuse, alteration, misuse, damage during shipment, improper
service, unauthorized or unreasonable use of the meter or
electrodes. This warranty does not cover batteries or contact
pins. If the meter or any optional electrodes have been
tampered with, the warranty shall be void. At our option, we
may replace or repair the meter.

Delmhorst shall not be liable for incidental or consequential
damages for the breach of any express or implied warranty
with respect to this product or its calibration. With proper
care and maintenance the meter should stay in calibration;
follow the instructions in the

Care of Your Meter section.

UNDER NO CIRCUMSTANCES SHALL DELMHORST BE
LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL,
OR CONSEQUENTIAL DAMAGES OF ANY TYPE
WHATSOEVER, INCLUDING, BUT NOT LIMITED TO,
LOST PROFITS OR DOWNTIME ARISING OUT OF OR
RELATED IN ANY RESPECT TO ITS METERS OR
ELECTRODES AND NO OTHER WARRANTY, WRITTEN,
ORAL OR IMPLIED APPLIES. DELMHORST SHALL IN
NO EVENT BE LIABLE FOR ANY BREACH OF
WARRANTY OR DEFECT IN THIS PRODUCT THAT
EXCEEDS THE AMOUNT OF PURCHASE OF THIS
PRODUCT.

The express warranty set forth above constitutes the entire
warranty with respect to Delmhorst meters and electrodes
and no other warranty, written, oral, or implied applies. This
warranty is personal to the customer purchasing the product
and is not transferable.

15

Advertising